RomRaider Logger XML UPDATE version 0.3.5b 10-02-09
--- Now Obsolete, see next post for updates ---To install, for RomRaider versions 0.5.1b and later, see below. The metric and standard definition files are identical, except that the logger units default to metric with the metric file and standard units with the standard file.
How To install logger defs (RomRaider versions 0.5.1b and later):- Download the file of the units you would most likely use from the bottom of this post.
- Unzip the logger.xml file into your preferred definitions directory replacing the existing file (if applicable) or in another directory of your choice where it is unlikely to be moved or deleted.
- Start RomRaider's logger from within RomRaider by selecting "Logger" -> "Launch ECU Logger" from the menu bar.
- From within RomRaider's logger, select "Settings" -> "Logger Definition Location" from the menu bar.
- Select the location of the new unzipped logger.xml file.
0.3.5b CHANGE LISTExtended parameter support was added for the following ROMs32-BIT ECUUSDM
- A2TB001N (2008/09 USDM Legacy(Outback) GT(XT) MT)
- A2UG000C (2007 USDM Legacy GT AT)
- A2UG000N (2007 USDM Legacy GT MT)
- A2UI001L (2007 USDM Legacy GT spec.B MT)
- A2WC400K (2005 USDM Baja Turbo AT)
- A2WC412D (2005 USDM Forester XT AT)
- A2WC412I (2005 USDM Forester XT MT)
- A2WC500R (2005 USDM Outback XT AT)
- A2WC511C (2005 USDM Legacy GT AT)
- A2WF100K (2006 USDM Baja Turbo AT)
- A2WF100L (2006 USDM Baja Turbo MT)
- A2WF101L (2006 USDM Baja Turbo MT)
- A8DH101I (2006 USDM Forester XT MT)
- A8DH202X (2006 USDM Impreza WRX MT)
- A8DK101X (2007 USDM Impreza WRX MT)
- AZ1E401B (2008 USDM Impreza WRX AT)
- AZ1G701I (2010 USDM Impreza STi MT)
- D2UG101B (2007 USDM B9 Tribeca AT)
- DZ1E402B (2009 USDM Tribeca AT)
- E2TB011I (2008 USDM Forester 2.5 AT)
- E2UE202L (2006 USDM Impreza 2.5i MT)
- E2VG211D (2006 USDM Forester 2.5 MT/AT)
- E2VG221D (2007 USDM Forester 2.5 MT/AT)
- E2VH101C (2006 USDM Impreza 2.5i MT/AT)
- E2ZJ133G (2005 USDM Impreza 2.5RS MT/AT)
- EZ1D302B (2009 USDM Legacy 2.5i AT)
- EZ1E102G (2008 USDM Impreza 2.5i MT)
- EZ1E401G (2008/09 USDM Impreza 2.5i MT)
- EZ1G109K (2009 USDM Forester 2.5 MT)
JDM
- A2PG420A (2007 JDM Legacy GT AT)
- A2SB000A (2008 JDM Legacy GT AT)
- A2SB000Y (2008 JDM Outback XT AT)
- A2TB100B (2007 JDM Legacy GT MT)
- A2TB100K (2007 JDM Legacy GT spec.B MT)
- A2TB100V (2008 JDM Impreza SGT AT)
- A2TB100Y (2007 JDM Legacy GT AT)
- A2UG000B (2006 JDM Legacy GT MT)
- A2UH000A (2006 JDM Legacy GT AT)
- A2UI000K (2007 JDM Legacy GT spec.B MT)
- A2WC011E (2004-07 JDM Forester STi MT)
- A2WD001B (2004 JDM Legacy GT MT)
- A2ZJC00B (2004 JDM Legacy GT MT)
- AZ1G105L (2009 JDM Forester XT AT)
- AZ1G301F (2008 JDM Impreza STi MT)
- AZ1G500F (2009 JDM Impreza STi MT)
- AZ1G502L (2009 JDM Impreza STi AT)
- AZ1H102W (2008 JDM Exiga 2.0GT AT)
- D2UK001Q (2007 JDM Legacy 3.0R AT)
- D2WD604A (2005 JDM Legacy 3.0R MT)
- E2WD500D (2005 JDM Outback 2.5i AT)
ADM/SADM
- A2UI000Y (2008 ADM Liberty GT AT)
- A8DK100H (2007 ADM Forester XT AT)
- AE5F301D (2010 ADM Liberty GT MT)
- AZ1E400E (2008 SADM Impreza WRX MT)
- AZ1G400X (2009 SADM Impreza WRX MT)
- AZ1G400W (2009 ADM Impreza WRX MT)
- D2UH001M (2007 ADM Liberty 3.0R MT)
- D2WD603H (2005 ADM Liberty 3.0R MT)
- E2UE101J (2006/07 ADM Forester 2.5 AT)
- E2UE102J (2006/07 ADM Forester 2.5 MT)
EDM
- A8DH20 (2006 EDM Impreza STi MT)
- A8DK100F (2007 EDM Forester XT MT)
- AZ1E400U (2008 EDM Impreza WRX MT)
- AZ1G101M (2009/10 EDM Forester XT MT)
- AZ1G101N (2009/10 EDM Forester XT AT)
- AZ1G202G (2008 EDM Impreza STi MT)
- AZ1G400U (2009 EDM Impreza WRX MT)
- D2TB201R (2008 EDM Legacy 3.0R AT)
- E2SB001K (2008 JDM Legacy 2.5i AT)
- Z1G20000 (2008/09 EDM Impreza STi MT)
16-BIT ECUUSDM
- A4TF810F (2005 USDM Impreza WRX MT)
JDM
- 4SLEHB00 (2002 JDM Legacy BH MT/AT) *NON-BOOST CONTROL RELATED PARAMETERS ONLY
- A4SD600B (2001/02 JDM Impreza STi MT/AT)
- A4SHB00G (2002 JDM Legacy BH MT/AT) *NON-BOOST CONTROL RELATED PARAMETERS ONLY
- A4SHB00H (2002 JDM Legacy B4 MT/AT) *NON-BOOST CONTROL RELATED PARAMETERS ONLY
- A4TE002Q (2003 JDM Impreza STi MT/AT)
- A4TJ1X00 (Group N Impreza STi MT/AT)
SADM
- A4RL100K (2003 SADM Forester Turbo MT/AT)
The following NEW extended parameters were addedClosed Loop Fueling Target (4-byte)* [32-bit ECU] - This is the closed loop fueling lambda target which is used in determining short-term corrections (A/F Correction #1).
Closed Loop Fueling Target (2-byte)* [32-bit ECU - applicable ECUs only] - This is the 2-byte "engineer's" version.
Fueling Final Base (4-byte)* [32-bit ECU] - This is the final fueling multiplier after corrections are applied but before per injector compensation.
Fueling Final Base (2-byte)* [32-bit ECU - applicable ECUs only] - This is the 2-byte "engineer's" version.
The following NEW standard parameters were addedThe following standard parameters were added to allow those who do not have extended parameter support for their 07+ ECU to log these in-between definition releases:
IAM [Most 07 and later ECUs] - Ignition Advance Multiplier (IAM) as a standard parameter.
Fine Learning Knock Correction [Most 07 and later ECUs] - Fine Learning Knock Correction as a standard parameter.
MISC. CHANGES1. Addressed an issue where the standard parameter 'A/F Correction #3' displayed incorrect values when logging the 32-bit ECU, but the correct values when logging the 16-bit ECU. This is due to the unique nature of this parameter which requires two different conversions for each ECU. Users will need to either select the 'A/F Correction #3 (16-bit ECU)' or the 'A/F Correction #3 (32-bit ECU)' parameter depending on what ECU they are logging.
2. Changes were made to 'Timing Advance' related logger names to reflect the changes in the ECU defs to the more consistent/clear "Knock Correction Advance" description. See link to extended parameter descriptions below.
*****************************************************************************************
Complete list of currently supported "extended" parametersDescriptions for all extended parameters currently supported by these logger definitions can be found
HERE.
Currently supported calculated parametersNote: These do not require the custom definitions for each ROM but are rather calculated from standard SSM parameters. These will show up in the normal list of Subaru parameters.
Engine Load (Calculated) (4,4) -> Engine load as calculated from MAF and engine speed. Useful if your ECU is not supported for extended parameters.
Fuel Consumption (Est.) (4,4) -> Estimates current fuel consumption based on MAF, vehicle speed and AFR (front o2).
Injector Duty Cycle (%) (3,3) -> As calculated from injector pulse width and engine speed.
Manifold Relative Pressure (Corrected) (2,2) -> The standard SSM parameter 'Manifold Relative Pressure' is limited to a reading around 18.4 psi. This parameter overcomes this limit by calculating relative pressure by subtracting 'Atmospheric Pressure' from 'Manifold Absolute Pressure'. This effectively raises the limit to about 22 psig at sea level (actual limit will be about 37 psia - local atmospheric pressure).
Currently supported standard SSM (Subaru Select Monitor) parametersRomRaider's logger will display all applicable SSM parameters supported by your ECU. Reference your factory service manual for a list and description of the standard SSM parameters.
Supported ECU revision list for extended parametersExtended parameter support covers all of the same ECUs supported by the latest ECU definitions:
http://www.romraider.com/Documentation/SupportedECUs************************************
Please do not host these definitions on your own site. Instead, provide a link to this post only.
See last post if you are using RomRaider version 0.5.4b RC1 or higher.Archived logger definitions:Attachment:
File comment: For OBSOLETE RomRaider versions 0.5.1b to 0.5.3b RC9 ONLY
ROMRAIDER STANDARD units LOGGER definitions 0.3.5b 10-02-09.zip [91.1 KiB]
Downloaded 65143 times
Attachment:
File comment: For OBSOLETE RomRaider versions 0.5.1b to 0.5.3b RC9 ONLY
ROMRAIDER METRIC units LOGGER definitions 0.3.5b 10-02-09.zip [91.09 KiB]
Downloaded 40385 times
^^^^ These files are OBSOLETE^^^^
