|
RomRaider
Documentation
Community
Developers
|
|
It is currently Sun May 19, 2013 6:40 pm
|
| Author |
Message |
|
cbombara
|
Post subject: Re: AE5K611V - 2012 STi USDM - ECU ID - 8112597007 Posted: Thu May 10, 2012 5:12 pm |
|
 |
| Newbie |
 |
Joined: Thu Aug 05, 2010 12:19 pm Posts: 27 Location: Manassas, VA
|
|
Finally getting around to actually start tuning the car - was planning on transferring the settings from the Ziggyrama Stage 1 2011 STI tune to my ROM and then work from there- noticing some very odd values in some tables in my OEM ROM in ECUFlash- most specifically "Timing Compensation A (IAT)" and "Timing Compensation B (IAT)". Compared to the 2011 map I am looking at both the axis and values are so far off they don't seem to make any sense. Can anyone look at this and let me know what is going on?
|
|
| Top |
|
 |
|
td-d
|
Post subject: Re: AE5K611V - 2012 STi USDM - ECU ID - 8112597007 Posted: Thu May 10, 2012 5:57 pm |
|
 |
| RomRaider Donator |
Joined: Thu May 20, 2010 4:01 am Posts: 1422 Location: Johannesburg, South Africa
|
|
I'll have a look first thing tomorrow.
_________________ ___________________________________ He who dies with the most gadgets wins.
|
|
| Top |
|
 |
|
td-d
|
Post subject: Re: AE5K611V - 2012 STi USDM - ECU ID - 8112597007 Posted: Fri May 11, 2012 3:56 pm |
|
 |
| RomRaider Donator |
Joined: Thu May 20, 2010 4:01 am Posts: 1422 Location: Johannesburg, South Africa
|
|
Ok - fixed the timing compensation values, and uploaded updated definition.
_________________ ___________________________________ He who dies with the most gadgets wins.
|
|
| Top |
|
 |
|
cbombara
|
Post subject: Re: AE5K611V - 2012 STi USDM - ECU ID - 8112597007 Posted: Fri May 11, 2012 7:40 pm |
|
 |
| Newbie |
 |
Joined: Thu Aug 05, 2010 12:19 pm Posts: 27 Location: Manassas, VA
|
|
So if I had already made edits to those values should I start over with a fresh copy of my stock ROM?
Thanks for fixing this so quickly!
|
|
| Top |
|
 |
|
throttlehappy
|
Post subject: Re: AE5K611V - 2012 STi USDM - ECU ID - 8112597007 Posted: Fri May 11, 2012 8:29 pm |
|
 |
| Senior Member |
Joined: Sat Feb 12, 2011 7:27 pm Posts: 1099 Location: Australian STi & FozXT owner
|
cbombara wrote: So if I had already made edits to those values should I start over with a fresh copy of my stock ROM?
Thanks for fixing this so quickly! Yes, will need to start again 
_________________ Amateurs built the Ark, Professionals built Titanic White S206 - PBMS Rollcage, HKS DP, Ti catback Blue SH9 XT - E85 32bit Multimode Test Vehicle(IAM = 2.000) Black N14 SSS Pulsar(with a 3.5L V6 Altima swap) getting an EZ30R ECU
|
|
| Top |
|
 |
|
td-d
|
Post subject: Re: AE5K611V - 2012 STi USDM - ECU ID - 8112597007 Posted: Sat May 12, 2012 4:29 am |
|
 |
| RomRaider Donator |
Joined: Thu May 20, 2010 4:01 am Posts: 1422 Location: Johannesburg, South Africa
|
|
Yes, or at least the version before you made edits to those tables. I tend to save versions as I'm going along for that reason.
_________________ ___________________________________ He who dies with the most gadgets wins.
|
|
| Top |
|
 |
|
throttlehappy
|
Post subject: Re: AE5K611V - 2012 STi USDM - ECU ID - 8112597007 Posted: Sat May 12, 2012 8:59 am |
|
 |
| Senior Member |
Joined: Sat Feb 12, 2011 7:27 pm Posts: 1099 Location: Australian STi & FozXT owner
|
EcuEdit atleast you can do a ROM compare and make it fast to swap everything over 
_________________ Amateurs built the Ark, Professionals built Titanic White S206 - PBMS Rollcage, HKS DP, Ti catback Blue SH9 XT - E85 32bit Multimode Test Vehicle(IAM = 2.000) Black N14 SSS Pulsar(with a 3.5L V6 Altima swap) getting an EZ30R ECU
|
|
| Top |
|
 |
|
td-d
|
Post subject: Re: AE5K611V - 2012 STi USDM - ECU ID - 8112597007 Posted: Sat May 12, 2012 11:31 am |
|
 |
| RomRaider Donator |
Joined: Thu May 20, 2010 4:01 am Posts: 1422 Location: Johannesburg, South Africa
|
|
Hmm... Useful - a good suggestion for the Romraider rebuild?
_________________ ___________________________________ He who dies with the most gadgets wins.
|
|
| Top |
|
 |
|
cbombara
|
Post subject: Re: AE5K611V - 2012 STi USDM - ECU ID - 8112597007 Posted: Mon May 14, 2012 1:46 pm |
|
 |
| Newbie |
 |
Joined: Thu Aug 05, 2010 12:19 pm Posts: 27 Location: Manassas, VA
|
|
So I used the map_compare.exe to compare the tuned Stg1 2011 map against it's own base map. Dumped the diffs into an excel sheet so I knew which tables to compare/change. Then - one by one I was copying over the axis/values to my 2012 map in ECUFlash. Is there a faster/easier way to make the settings in two similar but slightly different ROMS?
|
|
| Top |
|
 |
|
cbombara
|
Post subject: Re: AE5K611V - 2012 STi USDM - ECU ID - 8112597007 Posted: Mon May 14, 2012 2:48 pm |
|
 |
| Newbie |
 |
Joined: Thu Aug 05, 2010 12:19 pm Posts: 27 Location: Manassas, VA
|
|
Just found another potential issue - table is "Knock Correction Advance Max Primary - Non Cruise (IAM)" - appears to have issues wih the axis being off. I didn't edit the table so I'm assuming I can continue to work on this map and make changes to this table once it's fixed - is this correct?
Edit - also same problem on "Knock Correction Advance Max Addiditve B (Knock Conditions)"
Edit #2 - I just swapped the x/y address values in the def and now it looks correct. Is this the correct solution?
|
|
| Top |
|
 |
|
td-d
|
Post subject: Re: AE5K611V - 2012 STi USDM - ECU ID - 8112597007 Posted: Tue May 15, 2012 4:43 am |
|
 |
| RomRaider Donator |
Joined: Thu May 20, 2010 4:01 am Posts: 1422 Location: Johannesburg, South Africa
|
|
I'll have a look as soon as I get a breather from work. Dammit - it looks like the last version that I worked on did not save - hence the bits and pieces that are from the base XML I used.
_________________ ___________________________________ He who dies with the most gadgets wins.
|
|
| Top |
|
 |
|
td-d
|
Post subject: Re: AE5K611V - 2012 STi USDM - ECU ID - 8112597007 Posted: Tue May 15, 2012 4:44 am |
|
 |
| RomRaider Donator |
Joined: Thu May 20, 2010 4:01 am Posts: 1422 Location: Johannesburg, South Africa
|
|
And you can continue working as long as you don't edit that map - let me rather have a look at the addresses before you use them.
_________________ ___________________________________ He who dies with the most gadgets wins.
|
|
| Top |
|
 |
|
td-d
|
Post subject: Re: AE5K611V - 2012 STi USDM - ECU ID - 8112597007 Posted: Tue May 15, 2012 4:48 am |
|
 |
| RomRaider Donator |
Joined: Thu May 20, 2010 4:01 am Posts: 1422 Location: Johannesburg, South Africa
|
|
Ok - had a look - yes, I just swapped the axes, joys of doing this till all hours in the night!
I'll revise the XML and repost.
_________________ ___________________________________ He who dies with the most gadgets wins.
|
|
| Top |
|
 |
|
cbombara
|
Post subject: Re: AE5K611V - 2012 STi USDM - ECU ID - 8112597007 Posted: Tue May 15, 2012 9:21 am |
|
 |
| Newbie |
 |
Joined: Thu Aug 05, 2010 12:19 pm Posts: 27 Location: Manassas, VA
|
|
Your work is greatly appreciated! I'll check out the new def - looking forward to getting this process started.
|
|
| Top |
|
 |
|
dschultz
|
Post subject: Re: AE5K611V - 2012 STi USDM - ECU ID - 8112597007 Posted: Mon May 21, 2012 12:46 am |
|
 |
| RomRaider Developer |
Joined: Wed May 20, 2009 9:49 pm Posts: 3660 Location: Canada eh!
|
|
Can you provide the addresses for: E_Boost_ErrorExt_E35 E_CLOL_FuelingExt_E33 E_Fine_Learning_Table_OffsetExt_E58 E_Knock_Correction_Advance_Max_PrimaryExt_E118 E_Map_Ratio_PrimaryExt_E42 E_Primary_WGDC_Maximum_1byteExtExt_E112 E_Target_Boost_2byteExtExt_E90 E_Target_Boost_4byteExt_E36 E_Target_Boost_Relative_4byteExt_E120 E_Throttle_Plate_Opening_Angle_2byteExtExt_E93 E_Timing_Compensation_IAT_A_4byteExt_E125 E_Turbo_Dynamics_Integral_4byteExt_E34 E_Turbo_Dynamics_Proportional_4byteExt_E37
Can you also confirm E_Primary_Wastegate_Duty_Cycle_4Byte_E77 is labelled correctly? Should be E_Primary_Wastegate_Duty_MaximumExt_4byteExt__E77 I beleive.
|
|
| Top |
|
 |
Who is online |
Users browsing this forum: No registered users and 0 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|