Learning View v1.0 RC3

Jochen_145 · **Joined:** Wed Nov 10, 2010 7:56 am **Posts:** 211

Anyone allready tried to read-out DTC on a diesel ECU ?

Are the diesel specific diesel DTC are allready implementated ?

Diesel-ECU got learing values for injectors, witch correcteds differences of the injector hardware.
These can be used for checking the injector hardware and the values can be read iva SSM-II.

Does it make sense to read read this parameters and display them like the knock-correction for pentrol engines ?

I my case, I will be very glad to be able to read out DTCs of the diesels in "clear-text", so this will be my fearture-request to learingVIEW

BR Jochen

crippsdr · **Posted:** Tue Nov 01, 2011 7:38 am

keen to see my ADM 06 forester 2.5 working on this program in the future.

dschultz · **Posted:** Tue Nov 01, 2011 10:06 am

You need to supply the ROM if you wish future support. Or a link to the ROM if it has already been submitted.

crippsdr · **Posted:** Wed Nov 02, 2011 11:53 pm

dschultz wrote:

You need to supply the ROM if you wish future support. Or a link to the ROM if it has already been submitted.

2006 ADM Subaru Forester 2.5 MT/AT - E2VG212E - 4252187006

http://forums.openecu.org/download/file.php?id=1353

jimbojones1000 · **Joined:** Wed Nov 09, 2011 6:33 pm **Posts:** 4

Hello, ive got an 08 STI and i cant get learning view to work, but although i'd like to get it working as it looks useful, what id love is if you could give me the command to reset my ECU, i have an elm box and i can send terminal commands but i havent got the SAE paper with all the OBDII commands, and it would be brilliant if you could tell me the command to send to reset the ecu?

thanks

throttlehappy · **Posted:** Thu Nov 10, 2011 7:59 am

Can I confirm LV support for AZ1G501K - 2010 STi Spec C with Ecu ID 6904794007 please?

jimbojones1000 · **Joined:** Wed Nov 09, 2011 6:33 pm **Posts:** 4

By clicking the ecu reset (which fails as its not connected) and checking the log it looks like it attempts to send the command

80 10 F0 05 B8 00 00 60 40 DD

to the car, is this the reset command?

I tried it, there was a noise somewhere but the clocks didnt reset or anything, have i reset it?

thanks

Sasha_A80 · **Posted:** Thu Nov 10, 2011 12:30 pm

This is a reset command.
You have to get the ecu response, turn ignition off and turn it on.
Some ecology related errors may not be erased.

nh8991 · **Posted:** Wed Nov 16, 2011 9:10 pm

dschultz wrote:

You need to supply the ROM if you wish future support. Or a link to the ROM if it has already been submitted.

2009 USDM Impreza 2.5i AT (EZ1E401H)

http://www.romraider.com/forum/viewtopic.php?f=8&t=7452&hilit=2009+impreza+2.5i

Thanks in advance.

throttlehappy · **Posted:** Wed Nov 16, 2011 10:10 pm

throttlehappy wrote:

Can I confirm LV support for AZ1G501K - 2010 STi Spec C with Ecu ID 6904794007 please?

Confirmed that it works. Thanks.

TriniGT · **Joined:** Sat Nov 19, 2011 8:11 am **Posts:** 2

Okay installed the Learning View but my ECU is not supported. How do I go about getting support for it. It is a JDM 2006 Forester Cross Sport with 2.0l Turbo transmission is AT as well. This is the message and the log attached.

Attachment:

LV ECU Error.jpg [ 16.65 KiB | Viewed 575 times ]

Attachment:

LearningView_LOG.txt [635 Bytes]
Downloaded 36 times

dschultz · **Posted:** Sat Nov 19, 2011 11:54 am

Provide a copy of your stock ROM. You can read it off the ECU using EcuFlash.

Sasha_A80 · **Posted:** Sat Nov 19, 2011 3:56 pm

2A04446305 ROM (AG572 Denso A8AK210A ECU ID ) is not supported by ecuFlash as well.

IAM 0xFF80DC
AF_LEARNING_A FFFF8054
AF_LEARNING_B FFFF805C
AF_LEARNING_C FFFF8064
AF_LEARNING_D FFFF806C

TriniGT · **Joined:** Sat Nov 19, 2011 8:11 am **Posts:** 2

What does that mean for me and my ECU?

dschultz · **Posted:** Sun Nov 20, 2011 1:48 am

It means you need to do a lot of reading... :wink:

RomRaider

Forum rules

Learning View v1.0 RC3

Who is online