RomRaider

Open Source ECU Tools
 FAQ •  Register •  Login 

RomRaider

Documentation

Community

Developers

It is currently Wed Apr 16, 2014 3:28 pm

All times are UTC - 5 hours [ DST ]





Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: 05 Forester DBW NA MT
PostPosted: Wed Dec 23, 2009 12:19 am 
Offline
RomRaider Donator
User avatar

Joined: Tue Dec 22, 2009 10:54 pm
Posts: 15
Location: Utica, NY
Hi All,

I have a 2005 forester DBW NA MT. The problem is that the ROM version is e2zj123h as read by a hex editor (apparently the e2zj121h IS supported, but not this one). Both ECUflash and RomRaider refuse to read it with "definition not found" errors. Yes, I have the latest defs. I have a short ram I want to exploit. . .

I have attached the rom in .hex format (Pulled successfully with ECUflash) in the hope that someone can define the XML for it. . . I'm sure others will benefit as well!

Thanks all.

Mega

EDIT: Or - if you give me the specs I can create the XML myself - I just need the general process instructions (like what tool you use, what is the base XML, etc. .. ). Thanks.


Attachments:
File comment: 2005 forester DBW NA MT ROM
foresterDBW2005NA.hex [1 MiB]
Downloaded 89 times
Top
 Profile  
 
 Post subject: Re: 05 Forester DBW NA MT
PostPosted: Sun Dec 27, 2009 11:10 pm 
Offline
RomRaider Donator
User avatar

Joined: Tue Dec 22, 2009 10:54 pm
Posts: 15
Location: Utica, NY
Anyone? really I just want to know if I can use the e2zj121h definition with my (odd) e2zj123h ECU.


Top
 Profile  
 
 Post subject: Re: 05 Forester DBW NA MT
PostPosted: Wed Jan 06, 2010 2:40 am 
Offline
Experienced

Joined: Mon Aug 18, 2008 7:15 pm
Posts: 316
Location: Chicago, Illinois
Don't give up! I will look into in the next week or so. I'm sorry for the delay, I'm still trying to get used to the 32bit stuff :)

Andy


Top
 Profile  
 
 Post subject: Re: 05 Forester DBW NA MT
PostPosted: Wed Jan 06, 2010 9:26 am 
Offline
RomRaider Donator
User avatar

Joined: Tue Dec 22, 2009 10:54 pm
Posts: 15
Location: Utica, NY
No Problem - if I had the details I may be able to create the definition myself.

I think this will help quite a few NA drivers on here!

Thanks again,
Nick


Top
 Profile  
 
 Post subject: Re: 05 Forester DBW NA MT
PostPosted: Wed Jan 20, 2010 11:53 pm 
Offline
Experienced

Joined: Mon Aug 18, 2008 7:15 pm
Posts: 316
Location: Chicago, Illinois
I apologize, the 32bit stuff is taking me a bit longer to get a decent grasp on than I had expected. I have the ROM saved and will start working on it as soon as I can.

Andy


Top
 Profile  
 
 Post subject: Re: 05 Forester DBW NA MT
PostPosted: Thu Jan 21, 2010 5:38 pm 
Offline
Senior Member

Joined: Mon Jan 19, 2009 2:31 pm
Posts: 1102
Location: Saratov, Russia
Andy,

Have a look at SD VE tables at this ROM

0xC3910 VE
0xC389C ManifoldPressure (13) kPa
0xC38D0 EngineSpeed (16)

0xC3CC4 VE alternative
0xC3C50 ManifoldPressure (13) kPa
0xC3C84 EngineSpeed (16)

Probably they are used at MAV failure conditions. Is there any other?

I have sent ecuFlash defs that Nick asked for.


Top
 Profile  
 
 Post subject: Re: 05 Forester DBW NA MT
PostPosted: Sun Jan 24, 2010 3:37 pm 
Offline
Experienced

Joined: Mon Aug 18, 2008 7:15 pm
Posts: 316
Location: Chicago, Illinois
Those seem to be the only tables used in that area, though I cannot verify that the are in fact SD tables used for MAF failure. I have not gone through this ROM as much as I would have hoped by now. These past few weeks have been very busy, I apologize.

Andy


Top
 Profile  
 
 Post subject: Re: 05 Forester DBW NA MT
PostPosted: Mon Jan 25, 2010 3:58 pm 
Offline
RomRaider Donator
User avatar

Joined: Tue Dec 22, 2009 10:54 pm
Posts: 15
Location: Utica, NY
Hi elevenpoint7five and Sasha_A80,

Thanks a bunch for the ECUflash def. I got my issue with the dead spot at WOT cleared up. Any idea when a RomRaider def will be available so I can really dig in to this ROM?

Also, I don't think I have AVCS Sasha.
Thanks a bunch!

Nick


Top
 Profile  
 
 Post subject: Re: 05 Forester DBW NA MT
PostPosted: Mon Jan 25, 2010 4:34 pm 
Offline
Senior Member

Joined: Mon Jan 19, 2009 2:31 pm
Posts: 1102
Location: Saratov, Russia
There is no difference what tool you are using for ROM corrections.

You may add appropriate corrections to your own copy of ecu_defs.xml using e2zj123h.xml definition for ecuFlash I had provided.

Anyway it is not allowed "unofficial" ecu_defs.xml to be uploaded here.
All additions should be incorporated into a local copy manually.


Top
 Profile  
 
 Post subject: Re: 05 Forester DBW NA MT
PostPosted: Mon Jan 03, 2011 3:09 pm 
Offline
RomRaider Developer

Joined: Wed May 20, 2009 9:49 pm
Posts: 4133
Location: Canada eh!
Ticket opened: http://trac2.assembla.com/romraider/ticket/15


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style based on FI Subsilver by phpBBservice.nl