Interesting - so even with a positive multiplier, the table can take negative values? or do you mean relative to the base timing - i.e. drop the whole table by the 1.4* that you're adding in 1st to 3rd?
BTW, working on pulling that H6 rom apart for you, in between work pressures!
Yeah, multiplier constant of 0.35 and then table value of 0 for 5th/6th, 2 for 4th, 4 for 3rd/3nd/1st. I also drop requested torque limit in 5th/6th to lower boost a little.
Thanks for looking at the H6 rom.