2011 EDM Impreza STi MT CAL ID: AZ1J500G (7442594007)

dkGoodrich dot com · **Joined:** Wed Sep 29, 2010 1:16 am **Posts:** 17

So what about a 2011 usdm STI? any definitions for those?

mc tuner · **Joined:** Fri Jul 02, 2010 6:56 am **Posts:** 14

with this XML, i still cant control the Primary Open Lope Fuel maps, Ignition Base timing Maps, the Variable Cam Timing Maps, Rad Fan Maps, Idle Control Maps, and some other sub maps which makes it very difficult to tune. is there any new update to enable these maps.

dschultz · **Posted:** Fri Jun 10, 2011 12:59 pm

You mean the logs show no change in results compared to what you put in the map (can you supply some example logs and/or tables)?
Or are you saying the changes to make to the map are not being written to the new ROM file for flashing?

mc tuner · **Joined:** Fri Jul 02, 2010 6:56 am **Posts:** 14

dschultz
the changes to make to the map are not being written to the new ROM file for flashing

dschultz · **Posted:** Sat Jun 11, 2011 10:06 am

Check your user level as it may be too low for those particular maps. The map (Table Properties) will tell you the user level you need to be to change them.

virus974 · **Posted:** Mon Jun 20, 2011 9:45 am

mc tuner wrote:

with this XML, i still cant control the Primary Open Lope Fuel maps, Ignition Base timing Maps, the Variable Cam Timing Maps, Rad Fan Maps, Idle Control Maps, and some other sub maps which makes it very difficult to tune. is there any new update to enable these maps.

with ecuflash ? :?:

if yes , use the last ecuflash definition update . (32bitbase.xml)

http://www.romraider.com/forum/viewtopic.php?f=8&t=3808

for me it have fixed the problem .

mc tuner · **Joined:** Fri Jul 02, 2010 6:56 am **Posts:** 14

virus974
I just want to thank you. in dead the update enabled all the locked parameters

virus974 · **Posted:** Fri Jun 24, 2011 10:47 am

you're welcome :wink:

Paerel · **Joined:** Sat Jul 02, 2011 1:04 pm **Posts:** 4

Hi, can someone tell me what to do with this (photo). I do not know what else I can do

dschultz · **Posted:** Mon Jul 04, 2011 2:01 pm

You must have a corrupt def file or something. Can you open other ROMs without error?

msgofast · **Posted:** Sun Jul 10, 2011 5:49 am

Was there any deffs for the 2011 6mt STI ADM ecu?

search turned one up that turned out to be JDM, but nothing else.

dschultz · **Posted:** Sun Jul 10, 2011 9:49 pm

Do you have or know the CAL ID for the ROM?

msgofast · **Posted:** Mon Jul 18, 2011 10:02 pm

Will get it out of the car this weekend, mates car he just got.

post it up in a new thread when i get it

legaulois · **Posted:** Thu Jul 28, 2011 8:32 am

new def for logger :
Cruise/noCruise - FFFF89FE
Switch I S S# - FFFF6185

legaulois · **Posted:** Thu Jul 28, 2011 1:53 pm

AZ1J500G (7442594007) of the STI XI can replace AZ1G201G, AZ1G202G and Z1G20000 of the STI X :wink:

RomRaider

2011 EDM Impreza STi MT CAL ID: AZ1J500G (7442594007)

Who is online