Tactrix Standalone Logging Config Tool

hunterjm · **Posted:** Sun Dec 23, 2012 1:49 am

There hasn't been much movement on the standalone logging front as far as config tools, but it looks like the most recent firmware allows for K-Line fast polling (i think) and those of us with CAN BUS cars can really benefit from it.

I created an online tool that will take a RomRaider profile.xml file and generate the required logcfg.txt from it. It makes it really easy to take your RomRaider profiles and create a config for standalone logging without having to match addresses from the definitions yourself. It also supports calculated parameters. I figured I would polish it up and put it out there in case it would be useful for anyone else. Please give it a twirl and let me know of any issues you encounter!

http://subaru.hunterjm.com/

dschultz · **Posted:** Mon Dec 24, 2012 12:27 am

Nice little tool, thanks.

hunterjm · **Posted:** Fri Dec 28, 2012 3:34 pm

dschultz wrote:

Nice little tool, thanks.

No problem. It was faster for me to write the script to do it than to look it up myself, and only marginally more time consuming to pretty it up for everyone else to use. Hope it helps at least one other person get setup!

Larimer · **Posted:** Tue Jan 01, 2013 8:59 pm

I'll be trying to get this working in the next couple days. Thanks for the tool!

hunterjm · **Posted:** Wed Jan 02, 2013 10:07 am

Larimer wrote:

I'll be trying to get this working in the next couple days. Thanks for the tool!

No problem. If you need any help, just let me know. I've had ~10 people use the tool so far but still no feedback. I guess it's working for them

Larimer · **Posted:** Mon Jan 07, 2013 10:27 am

Wow that was incredibly simple. I checked and it created logs and data was actually in them, so it looks like it's working.

Do you know if it will still save data to the SD if the USB is plugged in also? That's one thing I was curious about. Also I'll have to have to set up the wideband eventually (not installed) but it seems like that's pretty simple too.

dschultz · **Posted:** Mon Jan 07, 2013 6:08 pm

If the USB is connected to a computer, no. That disables the Standalone logging function.

hunterjm · **Posted:** Tue Jan 08, 2013 12:15 am

Larimer wrote:

Also I'll have to have to set up the wideband eventually (not installed) but it seems like that's pretty simple too.

I haven't added wideband support to the tool because 1) I don't have one yet, and 2) it is pretty straight forward and can be copied from the examples in the sample logging directory of ECUFlash.

It is kinda-sorta on my list, but looking up addresses for parameters was more time consuming IMO, so that is what I wanted to get started with for v1.

chappell943 · **Joined:** Wed Jan 18, 2012 10:05 pm **Posts:** 51

Great tool, thanks!

MFB · **Posted:** Wed Jan 16, 2013 6:19 pm

Does this work for calculated parameters and switches?

hunterjm · **Posted:** Wed Jan 16, 2013 7:32 pm

MFB wrote:

Does this work for calculated parameters and switches?

Not switches yet, but yes on calculated params.

Dennis87 · **Posted:** Thu Jan 24, 2013 8:33 am

Very nice tool

Does it only work with the v100 logger definition or can i upgrade to the latest v114 ?

hunterjm · **Posted:** Thu Jan 24, 2013 10:12 am

Dennis87 wrote:

Very nice tool

Does it only work with the v100 logger definition or can i upgrade to the latest v114 ?

I just updated the defs to v114 on the site.

Dennis87 · **Posted:** Thu Jan 24, 2013 11:04 am

thanks

sureshot007 · **Joined:** Fri Aug 31, 2007 7:43 pm **Posts:** 40

Does anyone else have an issue with Engine Load showing up as 100 for each entry?

RomRaider

Forum rules

Tactrix Standalone Logging Config Tool

Who is online