RomRaider Logo

RomRaider

Open Source ECU Tools
 FAQ •  Register •  Login 

RomRaider

Documentation

Community

Developers

It is currently Thu Dec 14, 2017 1:11 pm

All times are UTC - 5 hours [ DST ]





Post new topic Reply to topic  [ 240 posts ]  Go to page Previous  1 ... 12, 13, 14, 15, 16
Author Message
 Post subject: Re: UTILITY: CL/WOT MAF Scaling | Log View/Stats | Load/IAT
PostPosted: Thu Jun 08, 2017 1:40 am 
Offline
RomRaider Donator
User avatar

Joined: Sat Oct 06, 2007 11:57 pm
Posts: 60
Location: Land of Kangaroos.
That doesn't work either, something is afoot! Cut and past from excel no good either, surely coping from RR would be setup! Not sure what else can do, all these I have tried but screen shots for reference

Image

_________________
... Dave


Top
 Profile  
 
 Post subject: Re: UTILITY: CL/WOT MAF Scaling | Log View/Stats | Load/IAT
PostPosted: Thu Jun 08, 2017 1:42 am 
Offline
RomRaider Donator
User avatar

Joined: Sat Oct 06, 2007 11:57 pm
Posts: 60
Location: Land of Kangaroos.
Instructions also say to copy the VVT table, not columns or rows!

_________________
... Dave


Top
 Profile  
 
 Post subject: Re: UTILITY: CL/WOT MAF Scaling | Log View/Stats | Load/IAT
PostPosted: Thu Jun 08, 2017 4:04 pm 
Offline
Newbie

Joined: Sun Jul 13, 2014 6:12 pm
Posts: 80
It seems to be a bug, it didn't do then when it was initially developed. However if the RPM rows stay there then it appears to still run when you hit go.


Top
 Profile  
 
 Post subject: Re: UTILITY: CL/WOT MAF Scaling | Log View/Stats | Load/IAT
PostPosted: Fri Jun 09, 2017 5:52 pm 
Offline
Experienced

Joined: Sun Oct 27, 2013 8:28 pm
Posts: 106
oops, missed testing those tables when I made validation stricter, fixed in v2.4.1


Top
 Profile  
 
 Post subject: Re: UTILITY: CL/WOT MAF Scaling | Log View/Stats | Load/IAT
PostPosted: Mon Jun 19, 2017 4:08 am 
Offline
RomRaider Donator
User avatar

Joined: Sat Oct 06, 2007 11:57 pm
Posts: 60
Location: Land of Kangaroos.
Thanks very much for the little program, works an absolute treat.
Have you looked at incorporating the old KnockCounter14 XLS that helped with where to pull timing.
might be nice to load a log file, insert current timing table and then show possible corrections?


Attachments:
Knock counter 14.xls [7.89 MiB]
Downloaded 17 times

_________________
... Dave
Top
 Profile  
 
 Post subject: Re: UTILITY: CL/WOT MAF Scaling | Log View/Stats | Load/IAT
PostPosted: Mon Jun 19, 2017 4:20 am 
Offline
Experienced

Joined: Fri Sep 02, 2016 4:42 am
Posts: 248
Location: Riga, Latvia
You can do that (and much more) using Log Stats tab. Set axis to your ignition table, select Data as FLKC+FBKC and set Stats to "Minimum".


Top
 Profile  
 
 Post subject: UTILITY: CL/WOT MAF Scaling | Log View/Stats | Load/IAT Comp
PostPosted: Mon Jun 19, 2017 7:24 am 
Offline
RomRaider Donator
User avatar

Joined: Sat Oct 06, 2007 11:57 pm
Posts: 60
Location: Land of Kangaroos.
That is awesome. Thx
Doesn't really report back knock in same fashion though ;-)

_________________
... Dave


Top
 Profile  
 
 Post subject: Re: UTILITY: CL/WOT MAF Scaling | Log View/Stats | Load/IAT
PostPosted: Mon Jun 19, 2017 2:04 pm 
Offline
Newbie

Joined: Sun Jul 13, 2014 6:12 pm
Posts: 80
I just simply add a column of data with a formula of:
Code:
=IF(FBKC2<FBKC1,FBKC2,IF(FLKC2<FLKC1,FLKC2,0))


Then use that to run through the Log Stats tab, should work a treat :wink:


Top
 Profile  
 
 Post subject: Re: UTILITY: CL/WOT MAF Scaling | Log View/Stats | Load/IAT
PostPosted: Tue Jun 20, 2017 9:10 pm 
Offline
RomRaider Donator
User avatar

Joined: Sat Oct 06, 2007 11:57 pm
Posts: 60
Location: Land of Kangaroos.
Thanks K', works like a charm.
Curious though on the nested IF statement.
Cant just use: =IF(FBKC2<FBKC1,FBKC2,0) as works the same??

_________________
... Dave


Top
 Profile  
 
 Post subject: Re: UTILITY: CL/WOT MAF Scaling | Log View/Stats | Load/IAT
PostPosted: Wed Jun 21, 2017 12:54 pm 
Offline
Newbie

Joined: Sun Jul 13, 2014 6:12 pm
Posts: 80
vaccine wrote:
Thanks K', works like a charm.
Curious though on the nested IF statement.
Cant just use: =IF(FBKC2<FBKC1,FBKC2,0) as works the same??


That will work just for FBKC, as FBKC and FLKC cannot be active at the same time my formula will give you a datapoint at the moment either FLKC or FBKC starts to reduce timing.


Top
 Profile  
 
 Post subject: Re: UTILITY: CL/WOT MAF Scaling | Log View/Stats | Load/IAT
PostPosted: Sat Jul 01, 2017 4:57 am 
Offline
Newbie
User avatar

Joined: Fri May 10, 2013 8:31 am
Posts: 79
Location: Australia
Hi,

I'm using the "MAF VE Calc" Tab to try and make an VE base map using your current maf scaling
I cant seem to get the MAF builder to work correct? Boost in log is psi rel sea level.


Attachments:
BtSsm_20170630_090633_knock.csv [3.51 MiB]
Downloaded 15 times
Capture.JPG
Capture.JPG [ 567.08 KiB | Viewed 399 times ]
Top
 Profile  
 
 Post subject: Re: UTILITY: CL/WOT MAF Scaling | Log View/Stats | Load/IAT
PostPosted: Sat Jul 01, 2017 11:33 am 
Offline
Experienced

Joined: Sun Oct 27, 2013 8:28 pm
Posts: 106
Are you running Merp's SD patch with Speed Density Mode = MAF Mode?
You really need to provide more info and attach your log(s) and current SD table.

Btw, did you read Wiki, did you follow link to this thread - http://www.romraider.com/forum/viewtopi ... =32&t=8080?


Top
 Profile  
 
 Post subject: Re: UTILITY: CL/WOT MAF Scaling | Log View/Stats | Load/IAT
PostPosted: Sat Jul 01, 2017 6:45 pm 
Offline
Newbie
User avatar

Joined: Fri May 10, 2013 8:31 am
Posts: 79
Location: Australia
vgi wrote:
Are you running Merp's SD patch with Speed Density Mode = MAF Mode?
You really need to provide more info and attach your log(s) and current SD table.

Indeed. Log already attached. Current SD table below

vgi wrote:
Btw, did you read Wiki, did you follow link to this thread - viewtopic.php?f=32&t=8080?
Yep :)


Attachments:
File comment: Current SD table
New Microsoft Excel Worksheet.xls [29 KiB]
Downloaded 20 times
Top
 Profile  
 
 Post subject: Re: UTILITY: CL/WOT MAF Scaling | Log View/Stats | Load/IAT
PostPosted: Thu Jul 27, 2017 8:27 pm 
Offline
Experienced

Joined: Sun Oct 27, 2013 8:28 pm
Posts: 106
@Makaveli so did you try running the Merp's SS, how did that go?


Top
 Profile  
 
 Post subject: Re: UTILITY: CL/WOT MAF Scaling | Log View/Stats | Load/IAT
PostPosted: Sun Sep 03, 2017 4:21 pm 
Offline
Newbie

Joined: Sun Jul 13, 2014 6:12 pm
Posts: 80
Does the Engine Load Compensation tab do open loop? If not, can we have the option that it does?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 240 posts ]  Go to page Previous  1 ... 12, 13, 14, 15, 16

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style based on FI Subsilver by phpBBservice.nl