RomRaider

Hey i was wondering if anyone had a base map that would get a 2002 wrx ej257 hybrid (2.0 heads) to at least fire up. I'm troubleshooting if there is something else wrong with a buddies car because I'm 90% sure the base map i made up is good to go.

Deatschwerks 565cc injectors
Crower 272 cams
K&N CAI
Cobb 3" Turboback
Catless up pipe
1.5 mm thick headgasket

Just maybe somthing that ur pretty sure will fire it up but i think its an electrical problem i just want the validation

post your base map
it would take some major changes to no get that setup to start

Thanks for the help

I know it may sound stupid to ask but when ever i have a problem starting a car i always check spark and fuel before I would check the map being used. Did you check for spark and fuel delivery? If your are getting those two things and its just cranking but not even popping i would load the stock rom in and see if it even starts. If it starts then you have a problem with your current rom. If it doesn't start then and you have spark and fuel then i would check sensors maybe it is picking up crank position at the wrong spot and firing on exhaust stroke.
Map posted doesn't look out of the ordinary.

Yeah everything's good on the fuel and spark side and I've tried a few different maps edits but not the stock one. The thing is it starts to turn over when cranking but quickly dies out we haven't had much time to really take a crack at diagnosing it because of school but we probably will soon after dropping a new tranny in my 2010 wrx. Where would ya look first?

Double check your latencies on the DWs. You can do a quick search on latencies and you will find that there are a few people, like me that ended up with latencies far different than what was stock. You may also want to try adjusting what cc you entered. I have DW750s yet when I tested them they only flowed 700.

Paul

Agreed. Injectors will be the issue. DW use Hepthane for flow and latency calculations.

Try stock injectors to see if it runs