RomRaider

There is no thread for this so I thought I'd post it since it is a useful tool for those looking to change to SD. Plus it is hard as hell to find in the group n thread lol.

Basically it converts load g/rev from your MAF based tune to DS load comp for the Group N ROM.

Instructions from the spreadsheet:

• The shaded cells are the only cells that can be changed.
• The mapping to the left should have an input of Speed Density Load Compensation as a %. It will give an output below in the form of load G/REV.
• The mappint to the right should have an input of Load (G/REV) and will give an output directly below as a Speed Density Load Compensation as %.
• Again only change shaded cells - changing any other cell above line 42 will cause the output to be false.

Hopefully Jsarv will see this thread and answer any questions that ppl ask.

Leslie

Might want to incorporate the iat comp into the formula, would probably give you more accurate results. Wish I had had good logs before I switched to SD, this would have saved me a ton of time...

Hopefully Jsarv will see your comment and make appropriate changes to his spreadsheet

Leslie