RomRaider

Open Source ECU Tools
 FAQ •  Register •  Login 

RomRaider

Documentation

Community

Developers

It is currently Fri Dec 19, 2014 9:32 pm

All times are UTC - 5 hours [ DST ]





Post new topic Reply to topic  [ 16 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: 06 USDM STi: CA91 octane STG2 (A2ZJE11J)
PostPosted: Fri Jul 31, 2009 4:40 pm 
Offline
Experienced

Joined: Wed Mar 29, 2006 10:04 am
Posts: 414
Location: Henderson, KY
Logs attached are from a 2006 STI STG2 running CA91 octane:

- 91 octane California gas
- catless divorced DP(stock rest of the way back)
- dropin K&N filter w/ silencer delete
- etuned

Same as my other maps, use at your own risk. If you have any questions, comments, concerns, please post them up. There's definitely power left on the table but this is a good conservative base map for 91octane cali gas.


Attachments:
06Sti 91 oct.gif
06Sti 91 oct.gif [ 13.1 KiB | Viewed 4364 times ]
06STiCA91Octane_r0.hex [1 MiB]
Downloaded 904 times
06 sti 91 CA octane log3.csv [3.22 KiB]
Downloaded 275 times
06 sti 91 CA octane log2.csv [3.08 KiB]
Downloaded 185 times
06 sti 91 CA octane log1.csv [2.64 KiB]
Downloaded 182 times

_________________
1988 Celica Alltrac - stockish
2005 LGT 5MT 315whp/340wtq -sold
2003 WRX 5MT 371whp/355wtq -sold
Top
 Profile  
 
 Post subject: Re: 2006 STi CA91 octane STG2
PostPosted: Wed Aug 05, 2009 6:29 am 
Offline
Newbie

Joined: Wed Aug 05, 2009 6:16 am
Posts: 10
would this map be safe to run with my full TBE and fmic


Top
 Profile  
 
 Post subject: Re: 2006 STi CA91 octane STG2
PostPosted: Wed Aug 05, 2009 7:57 am 
Offline
Experienced

Joined: Wed Mar 29, 2006 10:04 am
Posts: 414
Location: Henderson, KY
az06sti wrote:
would this map be safe to run with my full TBE and fmic


The WGD% and TD tables could be worked a bit better for a FMIC response but the TBE should be fine. Just post up the logs & I can tweak it in for you if you are not comfortable doing it.

_________________
1988 Celica Alltrac - stockish
2005 LGT 5MT 315whp/340wtq -sold
2003 WRX 5MT 371whp/355wtq -sold


Top
 Profile  
 
 Post subject: Re: 2006 STi CA91 octane STG2
PostPosted: Wed Aug 05, 2009 5:11 pm 
Offline
Newbie

Joined: Wed Aug 05, 2009 6:16 am
Posts: 10
i will asap. thank you..

is there away you add launch control and raise the rev limiter?


Top
 Profile  
 
 Post subject: Re: 2006 STi CA91 octane STG2
PostPosted: Wed Aug 05, 2009 7:50 pm 
Offline
Experienced

Joined: Wed Mar 29, 2006 10:04 am
Posts: 414
Location: Henderson, KY
az06sti wrote:
i will asap. thank you..

is there away you add launch control and raise the rev limiter?


The guy who developed the LC charges for it. The rev limiter is already set at 7000rpm, I don't see much reason for going higher.

_________________
1988 Celica Alltrac - stockish
2005 LGT 5MT 315whp/340wtq -sold
2003 WRX 5MT 371whp/355wtq -sold


Top
 Profile  
 
 Post subject: Re: 2006 STi CA91 octane STG2
PostPosted: Fri Aug 07, 2009 4:41 am 
Offline
Newbie

Joined: Wed May 14, 2008 12:54 am
Posts: 20
Nice map for starting...

I am using 94 Chevron octane (West Canada), and TBE, will this map be safe to use? any suggestion aboutthe 94 octane?

(I might install APS 65mm CAI soon, and I know I need MAF re-scaling by then...)

My friend with 05 STi also wants to test your stg2 base map, do you have an 05 STi version? Or Can I just copy every table from your 06 map into his 05 map for trail?

Many thx...

- Link


Top
 Profile  
 
 Post subject: Re: 2006 STi CA91 octane STG2
PostPosted: Fri Aug 07, 2009 8:10 am 
Offline
Experienced

Joined: Wed Mar 29, 2006 10:04 am
Posts: 414
Location: Henderson, KY
Linkseal wrote:
Nice map for starting...

I am using 94 Chevron octane (West Canada), and TBE, will this map be safe to use? any suggestion aboutthe 94 octane?

(I might install APS 65mm CAI soon, and I know I need MAF re-scaling by then...)

My friend with 05 STi also wants to test your stg2 base map, do you have an 05 STi version? Or Can I just copy every table from your 06 map into his 05 map for trail?

Many thx...

- Link


The 91map will be more than safe for 94. However I can send you a 93 map if you'd like & your friend I can send him one as well to test out.

Jeremy

_________________
1988 Celica Alltrac - stockish
2005 LGT 5MT 315whp/340wtq -sold
2003 WRX 5MT 371whp/355wtq -sold


Top
 Profile  
 
 Post subject: Re: 2006 STi CA91 octane STG2
PostPosted: Fri Aug 07, 2009 4:04 pm 
Offline
Newbie

Joined: Wed May 14, 2008 12:54 am
Posts: 20
Quote:

The 91map will be more than safe for 94. However I can send you a 93 map if you'd like & your friend I can send him one as well to test out.

Jeremy


Thanks Jeremy for the fast reply.


- Link


Last edited by Linkseal on Mon Feb 08, 2010 3:22 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: 06 USDM STi: CA91 octane STG2 (A2ZJE11J)
PostPosted: Sun Nov 22, 2009 12:35 pm 
Offline
Newbie

Joined: Mon Jul 28, 2008 7:50 am
Posts: 2
I'm trying to figure out some overboost issues I'm having between 3500-4500 rpm on my protune, do you think you could send me your 93 map as well so I can compare the ranges?


Top
 Profile  
 
 Post subject: Re: 06 USDM STi: CA91 octane STG2 (A2ZJE11J)
PostPosted: Sun Nov 22, 2009 2:13 pm 
Offline
Experienced

Joined: Wed Mar 29, 2006 10:04 am
Posts: 414
Location: Henderson, KY
R L Newb wrote:
I'm trying to figure out some overboost issues I'm having between 3500-4500 rpm on my protune, do you think you could send me your 93 map as well so I can compare the ranges?


pm me your email addy.

_________________
1988 Celica Alltrac - stockish
2005 LGT 5MT 315whp/340wtq -sold
2003 WRX 5MT 371whp/355wtq -sold


Top
 Profile  
 
 Post subject: Re: 06 USDM STi: CA91 octane STG2 (A2ZJE11J)
PostPosted: Wed Jan 20, 2010 2:53 pm 
Offline
Newbie

Joined: Fri Jan 15, 2010 7:26 pm
Posts: 9
Id also like to take a look at your 93oct stg2 if you wouldnt mind, need something to start on.


Top
 Profile  
 
 Post subject: Re: 06 USDM STi: CA91 octane STG2 (A2ZJE11J)
PostPosted: Fri Feb 05, 2010 12:14 am 
Offline
Newbie

Joined: Thu Feb 04, 2010 11:20 pm
Posts: 3
thanks for the input OP. This would help me to have something to start on for now. :)


Top
 Profile  
 
 Post subject: Re: 06 USDM STi: CA91 octane STG2 (A2ZJE11J)
PostPosted: Sun Jul 18, 2010 1:26 pm 
Offline
Newbie

Joined: Tue Sep 29, 2009 11:30 pm
Posts: 5
I'm on the East Coast, do you think I could talk you out of that 93oct map as well? I'll probably run the 91 but I'm curious to compare them (and possibly run it).

Thanks!


Top
 Profile  
 
 Post subject: Re: 06 USDM STi: CA91 octane STG2 (A2ZJE11J)
PostPosted: Mon Jan 17, 2011 1:45 pm 
Offline
Newbie

Joined: Wed Jul 28, 2010 5:25 am
Posts: 3
Nice map. Im going to look at transferring it onto EDM so I can put it into my car.
Im a bit of a noob at mapping at the moment. I run my car on 99oct. What would I need to tune to adjust to this?

Any help appreciated.
Thanks


Top
 Profile  
 
 Post subject: Re: 06 USDM STi: CA91 octane STG2 (A2ZJE11J)
PostPosted: Mon Oct 31, 2011 7:50 pm 
Offline
Newbie

Joined: Fri Oct 21, 2011 10:47 am
Posts: 1
im new to this open source tuning thing. is there anyway you can adjust this map for a grimmspeed 3port ebcs. full catless tbe, k&n sri? thank you in advance bud!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 16 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style based on FI Subsilver by phpBBservice.nl