RomRaider

There is a bug fix released today (9-22-08) for the 0.8.1b ECU definitions (originally released 09-08-08) that addresses an issue with changing/saving the "Min Primary Base Enrich 2 Decay Step 1" and ""Min Primary Base Enrich 2 Decay Step 2" tables for the 32-bit ECU. If you downloaded and installed the 0.8.1b ECU defs prior to 9-22-08, then you should download the fixed version and install:
topic360.html

Possibly another oddity ...

The following tables in A2ZJB10J show a Byte to Real of 'x * 0.0390625':
Min Primary Base Enrich 3 Initial Start 1A
Min Primary Base Enrich 3 Initial Start 1B
Min Primary Base Enrich 3 Initial Start 2A
Min Primary Base Enrich 3 Initial Start 2B

The rest of the Base enrich tables in A2ZJB10J show a Byte to Real of 'x * 0.0002441406'

While looking at A4TE200A, all of it's Base Enrich tables (including the Base Enrich 3 tables) show the 'x * 0.000244140625'.

Tim

You can't make a comparison between the 16-bit ECU and 32-bit ECU. The conversions for those tables are correct. The previous bug had the correct conversion but an additional character was inadvertently added to one of the expressions for those two tables (essentially a typo). That is, that error alone should not be taken as reason to question the other conversions for this group of tables.

Understood. Thanks for the info. I guess I need to flash again because I 'fixed' the non-broken 32-bit def. Thanks again.

t