RomRaider

Hi,
Just pulled the EDM MY08 WRX STI 2.5L with the freshly arrived OpenPort 2.0. Very worry the EDM will follow the USDM STI mapping..the old MY07 STI timing map is straight forward.

Here file XML for RomRaider for AZ1G201G

Caution!!
"Diagnosis disturbs codes" are not to manage, because there have a big problem, the codes resemble all Interior of XML there are codes which are between the following beacons:
********************* A vérifier - To check *********************
at checked
********************* Pas fait - not gives *********************
There is the " Diagnosis disturbs codes"

All your information will be the welcome to go towards version 1.0

Sorry, but I've already finished the defs for that ROM and I only add defs that I've done myself with my own tools to maintain consistency and greatest accuracy (my process from beginning to end is very structured and I employ a number of error checking/entry tools that I've developed). I removed your link because I do not want users to confuse your defs as some kind of official release. I appreciate the attempt, but it does not help in the process.

ok

I wanted just to help

I know and I wasn't trying to come off as harsh, but it is just the reality of the situation - sorry.

if not too troublesome, mind release this rom definition to me to hmanxx@hotmail.com before the main CANBUS cars definition release. Currently the car is using UTEC, not that perfect on injector scaling.

Sorry, I make it a rule not to release any definitions until the official release. Part of the process in error checking is checking the data defined by the defs in one rom relative to all other roms and that cannot be done until they are all finished.

Roger..will wait for it.thanks

thank you very much for this super work