ECU DEF hater

royv2007 · **Joined:** Thu Aug 07, 2008 9:49 pm **Posts:** 1

I have a usdm 02 wrx and downloaded the xpt stage 2 map. after installing all new definitions, ecu flash can read and load my rom, and romraider will log my ecu, but I cannot open the .hex in ecueditor. Anyone have any ideas? Thanks a ton.

merchgod · **Joined:** Wed Mar 29, 2006 10:38 pm **Posts:** 4225

XPT maps have a unique cal id that is not the factory identifier. You'll need to go to the XPT site and DL their defs which add their identifiers to the romraider defs.

Jon [in CT] · **Posted:** Sat Aug 09, 2008 1:27 pm

royv2007 wrote:

I have a usdm 02 wrx and downloaded the xpt stage 2 map. after installing all new definitions, ecu flash can read and load my rom, and romraider will log my ecu, but I cannot open the .hex in ecueditor. Anyone have any ideas? Thanks a ton.

If you want to use EcuFlash or EcuEdit to view/edit your maps, then first download the free hex editor at http://www.chmaas.handshake.de/delphi/freeware/xvi32/xvi32.htm. Use it to open your ROM image and change the ASCII string at offset 0x200 back to A4SGE01C.

BTW, don't use that string for any other models/years.

RomRaider

ECU DEF hater

Who is online