RomRaider

I'm having problems getting my lc-1 to come up in the new release of the romraider logger. It can't be a problem (or yet, could be, if i'm missing something)with the LC-1 programing or calibration, because i can start the LMlogger and it will read the LC-1 just fine. I've got the COM port set up right thru the plug-in menu, but my AFR still reads 0. is there something i'm missing here?

Go though the process of selecting the com port for the LC-1 again. Then uncheck and recheck LC-1 in the left pane of the logger and it should start reading values. Not ideal, but a work around for now at least.

i'll try that out and see if it makes a difference. thanks.

That's what I have to do every time. I agree, not ideal, but it always works just fine.

I never have a problem, I click on the LC-1 plugin first then select LC-1 from the external list and done.

I have to go even further.

1. If its already checked, uncheck it.
2. Select the COM port and hit OK
3. Check it.

It's a pain because i save the LC-1 on my profile, and then when i turn on the ignition it detects the current value of like 20.53 or something, and puts that on the data screen, but then never updates after that. I have to follow the steps above, then it usually works. Sometimes i get 0 after it though, and have to repeat a few times.

Would be great to see this fixed in the next RomRaider version.