RomRaider

These maps where originally posted over on the OSecu forums. The theads can be found here: Stage 2, and Stage 2 + GMBCS.

Both 91 and 92/93 octane maps are included in the "stage 2" map package, as well as maps for a full TBE, and for the stock axleback.

There is a second map package for stage 2 + GMBCS. This map only has a 92/93 octane version.

Run whichever one best fits your car modifications.

Map details
Map was tuned on a Stage 2 '06 WRX 5MT with the following:
TurboXS Stealthback (4" DP to 3" catted midpipe)
Stock axleback (and later maps tuned with a Maddad Whisper 2.5")
Panel filter
Sorkus delete
This map was also tuned on MN 92 E10 gas.

List of changes, not fully exclusive:
Timing Modified
Boost Map Rescaled and Modified
WGDC Map Modified
Turbo Dynamics Modified
AVCS Modified
Fuel Modified (could use some more work)

I think one of the highlights of this map is that the rescaled boost table cuts down on 4th and 5th gear overboost. These maps are works in progress (aren't they all!).

As always, log your car and use at your own risk.

Enjoy.

-Bw

Nice looking map

Q: if u start from 2000 rpm, what kind of boost does it see without a gmbcs in, lets say, 3rd gear?

I am not using your particular map, but my friend has an 06 with just TBE and were having a tough time seeing more than 15 psi. (not using this map)

Most stock BCS cars (as long as they're not at altitude) with a full TBE seem to be able to hit at least 18+ PSI with no problem. You can take a look at a number of logs on the OSecu forums.

He might need to turn the WG arm.

BTW, fix your map package again, that 2006 is a 2007, AGAIN!

Lies! (ok, map packages re-upped).

The GMBCS download doesnt work

Hrm, not sure how that happened. I've re-upped the package. If it breaks again, you can also get it here on the OSecu website, along with more map discussion.

what kind of performance gains could be expected going from the 07 stg2 map to the gmbcs map?

Significant. Take a look at my load and road dyno numbers on the OSecu forums for graphical numbers.

Just flashed the stage 2 map (stock catback and gutted downpipe) Seems that I have some knock (
Gurus, please take a look to my logs. What'd you say. Anyone have a clue how possibly can I fix it?
Appreciate any ideas.
Anton

I posted on the OSecu forums as well:

Your logs are fine. That little amount of learned FBKC in those partial throttle areas are fine. Post up a full 3rd gear pull.

Where are you and what type of gas are you running?

Europe, sir.
running 98 RON super - poopper blei-frei
Attached is 3 gear pull log
Thanks

Your log looks fine, but it's not a full 3rd gear pull. Try one from 2k-redline, that is really the only way to get a full picture.