RomRaider

Im really new to this logging and overall learning about my car and how it works with my tune. I had it tuned last spring by a reputeable tuner and just thought id do my first own log since that tune. Ive been reading and reading trying to learn all this stuff and what is normal and what isnt (havent even considered thinking of making corrections myself) so here is a log, 3rd gear pull. (with hopefully the right parameters) i have an 04 wrx 5mt, full catless tbe, k&n typhoon short ram, ecu tuned stg. 2 and thats it for mods. id appreciate feedback and what i could do to improve my tune. thanks

just noticed this too. the throttle angle states that it was 90.5% to 90.98%... what would cause this?
i had the pedal to the metal.

First you should download the new logger definitions here:
topic1642.html

Then log these parameters from the FAQ:
http://www.romraider.com/Documentation/ ... rFAQ#toc69

Then it will be a lot easier for people to give you worthwhile feedback.

^^^ What he said.

This tune is very aggressive. Way too much timing for a Stage 2 WRX on pump 92; the ECU agrees. IDC's go over 100% @ 5500 RPM then just keep on climbing, who knows what they are like at 7000rpm.

Your reputable tuner did you wrong.

i tried loading the new logger definitions but didnt know how to upload them to the logger. can you tell me how to get those up?

read the instructions on the same page as the logger def download.

did that. so just to make sure. i open the ecu logger screen and then i went to file > load profile > and selected the new logger definitions that have been downloaded and unzipped? or do i just add it to the ecu Definition priority list?