For those who are having issues with the new logger defs

crystal_imprezav · **Joined:** Mon Jul 31, 2006 9:10 am **Posts:** 48

Took me a bit to figure out why the new logger defs would not connect to my ECU after I downloaded them but I finally took the time to look into it. So, for those who are dazed and confused here you go. Hopefully Merch will fix the defs when he reads this.

New defs are missing the baud rate xml.
Current:
<protocol id="SSM">
________________________________________________________________

Needs to replaced with:
<protocol id="SSM" baud="4800" databits="8" stopbits="1" parity="0" connect_timeout="2000" send_timeout="55">

kascade · **Posted:** Fri Jul 27, 2007 3:13 am

crystal_imprezav wrote:

Took me a bit to figure out why the new logger defs would not connect to my ECU after I downloaded them but I finally took the time to look into it. So, for those who are dazed and confused here you go. Hopefully Merch will fix the defs when he reads this.

New defs are missing the baud rate xml.
Current:
<protocol id="SSM">
________________________________________________________________

Needs to replaced with:
<protocol id="SSM" baud="4800" databits="8" stopbits="1" parity="0" connect_timeout="2000" send_timeout="55">

The new defs are meant to be compatible with the official 0.4.1b release and they are. They are not compatible with the test releases, but yes, doing the above fixes this.

RomRaider

Forum rules

For those who are having issues with the new logger defs

Who is online