RomRaider

ihave a 2002 usdm wrx using open port 1.3 cable


please help

make sure the ignition is on. Try another com port (selectable in the logger).

thanks for the speedy reply

ill try selecting different ports: when i was trying to connect before, only COM3 showed in the drop-down.

i had old versions of RomRaider and ecuflash so i unistalled them and all my old drivers and downloaded all the newest versions of software and drivers. im hoping that will help

ill let you keep ya posted

i tried selecting a different port this morning but still only have 1 option for ports in the dropdown menu. COM3 Should i try to plug the usb into a different port on my laptop?

i was able to connect to my ecu earlier using ecuflash and the open port1.3 tx560 driver.

I was using ecuexplorer to log with but it doesnt support Openport 1.3 hardware. When i found out eniginuity had a logger i thought i give it a try because i like RomRaider

I would uninstall Ecuflash and all drivers (should be 5 of them) from add/remove programs. Reboot and then install Ecuflash 1.30. Plug your tactrix cable in - if windows asks to search for drivers, select search automatically.

thanks merchgod