|
RomRaider
Documentation
Community
Developers
|
|
It is currently Sat Jul 31, 2010 6:57 pm
|
| Author |
Message |
|
Bullwinkle1983
|
Post subject: 06-07 USDM WRX MT: Bullwinkle Stg 2 Maps (A8DH201X/A8DK100X)  Posted: Sat May 10, 2008 9:15 pm |
|
 |
| Experienced |
 |
Joined: Sat Dec 16, 2006 1:59 pm
Posts: 193
|
These maps were originally posted over on the OSecu forums. The theads can be found here: Stage 2, and Stage 2 + GMBCS. Both 91 and 92/93 octane maps are included in the "stage 2" map package, as well as maps for a full TBE, and for the stock axleback. There is a second map package for stage 2 + GMBCS. This map only has a 92/93 octane version. Run whichever one best fits your car modifications. Map detailsMap was tuned on a Stage 2 '06 WRX 5MT with the following: TurboXS Stealthback (4" DP to 3" catted midpipe) Stock axleback (and later maps tuned with a Maddad Whisper 2.5") Panel filter Sorkus delete This map was also tuned on MN 92 E10 gas. List of changes, not fully exclusive:Timing Modified Boost Map Rescaled and Modified WGDC Map Modified Turbo Dynamics Modified AVCS Modified Fuel Modified (could use some more work) I think one of the highlights of this map is that the rescaled boost table cuts down on 4th and 5th gear overboost. These maps are works in progress (aren't they all!). As always, log your car and use at your own risk.Enjoy. -Bw
_________________
aka:
-Nate
Last edited by Bullwinkle1983 on Sat Feb 27, 2010 11:21 pm, edited 5 times in total.
|
|
| Top |
|
 |
|
anthonyr86
|
Post subject: Re: BASE MAP: Bullwinkle 06-07 WRX 5MT Stage 2 Maps Posted: Fri Jul 11, 2008 1:08 am |
|
|
| Newbie |
Joined: Tue Feb 06, 2007 2:37 am
Posts: 42
|
|
Nice looking map
Q: if u start from 2000 rpm, what kind of boost does it see without a gmbcs in, lets say, 3rd gear?
I am not using your particular map, but my friend has an 06 with just TBE and were having a tough time seeing more than 15 psi. (not using this map)
|
|
| Top |
|
|
|
Bullwinkle1983
|
Post subject: Re: BASE MAP: Bullwinkle 06-07 WRX 5MT Stage 2 Maps Posted: Fri Jul 11, 2008 4:33 pm |
|
|
| Experienced |
|
Joined: Sat Dec 16, 2006 1:59 pm
Posts: 193
|
anthonyr86 wrote: Nice looking map
Q: if u start from 2000 rpm, what kind of boost does it see without a gmbcs in, lets say, 3rd gear?
I am not using your particular map, but my friend has an 06 with just TBE and were having a tough time seeing more than 15 psi. (not using this map) Most stock BCS cars (as long as they're not at altitude) with a full TBE seem to be able to hit at least 18+ PSI with no problem. You can take a look at a number of logs on the OSecu forums.
_________________
aka:
-Nate
|
|
| Top |
|
|
|
Nuke209
|
Post subject: Re: BASE MAP: Bullwinkle 06-07 WRX 5MT Stage 2 Maps Posted: Mon Jul 14, 2008 11:37 pm |
|
|
| Experienced |
Joined: Sun Oct 15, 2006 9:10 pm
Posts: 116
|
|
He might need to turn the WG arm.
BTW, fix your map package again, that 2006 is a 2007, AGAIN!
|
|
| Top |
|
|
|
Bullwinkle1983
|
Post subject: Re: BASE MAP: Bullwinkle 06-07 WRX 5MT Stage 2 Maps Posted: Fri Jul 18, 2008 2:46 pm |
|
|
| Experienced |
|
Joined: Sat Dec 16, 2006 1:59 pm
Posts: 193
|
Nuke209 wrote: He might need to turn the WG arm.
BTW, fix your map package again, that 2006 is a 2007, AGAIN! Lies! (ok, map packages re-upped).
_________________
aka:
-Nate
|
|
| Top |
|
|
|
bcs925
|
Post subject: Re: BASE MAP: Bullwinkle 06-07 WRX 5MT Stage 2 Maps Posted: Sun Jul 27, 2008 1:39 pm |
|
|
| Newbie |
Joined: Sun Jul 27, 2008 1:37 pm
Posts: 7
|
|
The GMBCS download doesnt work
|
|
| Top |
|
|
|
Bullwinkle1983
|
Post subject: Re: BASE MAP: Bullwinkle 06-07 WRX 5MT Stage 2 Maps Posted: Sun Jul 27, 2008 1:54 pm |
|
|
| Experienced |
|
Joined: Sat Dec 16, 2006 1:59 pm
Posts: 193
|
Hrm, not sure how that happened. I've re-upped the package. If it breaks again, you can also get it here on the OSecu website, along with more map discussion.
_________________
aka:
-Nate
|
|
| Top |
|
|
|
boostdog
|
Post subject: Re: BASE MAP: Bullwinkle 06-07 WRX 5MT Stage 2 Maps Posted: Sat Aug 23, 2008 2:51 pm |
|
|
| Newbie |
 |
Joined: Fri Aug 17, 2007 2:55 pm
Posts: 69
|
|
what kind of performance gains could be expected going from the 07 stg2 map to the gmbcs map?
_________________
Arkansas Subaru Owners Club visit us at http://subark.net/
|
|
| Top |
|
|
|
Bullwinkle1983
|
Post subject: Re: BASE MAP: Bullwinkle 06-07 WRX 5MT Stage 2 Maps Posted: Sun Aug 24, 2008 1:45 pm |
|
|
| Experienced |
|
Joined: Sat Dec 16, 2006 1:59 pm
Posts: 193
|
|
Significant. Take a look at my load and road dyno numbers on the OSecu forums for graphical numbers.
_________________
aka:
-Nate
|
|
| Top |
|
|
|
toxin
|
Post subject: Re: BASE MAP: Bullwinkle 06-07 WRX 5MT Stage 2 Maps Posted: Sun Sep 07, 2008 10:17 am |
|
|
| Newbie |
Joined: Fri Aug 15, 2008 6:58 am
Posts: 8
|
Just flashed the stage 2 map (stock catback and gutted downpipe) Seems that I have some knock  ( Gurus, please take a look to my logs. What'd you say. Anyone have a clue how possibly can I fix it? Appreciate any ideas. Anton
|
|
| Top |
|
|
|
Bullwinkle1983
|
Post subject: Re: BASE MAP: Bullwinkle 06-07 WRX 5MT Stage 2 Maps Posted: Tue Sep 09, 2008 7:32 pm |
|
|
| Experienced |
|
Joined: Sat Dec 16, 2006 1:59 pm
Posts: 193
|
|
I posted on the OSecu forums as well:
Your logs are fine. That little amount of learned FBKC in those partial throttle areas are fine. Post up a full 3rd gear pull.
Where are you and what type of gas are you running?
_________________
aka:
-Nate
|
|
| Top |
|
|
|
toxin
|
Post subject: Re: BASE MAP: Bullwinkle 06-07 WRX 5MT Stage 2 Maps Posted: Wed Sep 10, 2008 2:01 am |
|
|
| Newbie |
Joined: Fri Aug 15, 2008 6:58 am
Posts: 8
|
Bullwinkle1983 wrote: Where are you and what type of gas are you running? Europe, sir. running 98 RON super - poopper blei-frei   Attached is 3 gear pull log Thanks
|
|
| Top |
|
|
|
Bullwinkle1983
|
Post subject: Re: BASE MAP: Bullwinkle 06-07 WRX 5MT Stage 2 Maps Posted: Wed Sep 10, 2008 11:03 am |
|
|
| Experienced |
|
Joined: Sat Dec 16, 2006 1:59 pm
Posts: 193
|
|
Your log looks fine, but it's not a full 3rd gear pull. Try one from 2k-redline, that is really the only way to get a full picture.
_________________
aka:
-Nate
|
|
| Top |
|
|
|
Bullwinkle1983
|
Post subject: Re: 06-07 WRX MT: Bullwinkle Stage 2 Maps (A8DH201X/A8DK100X) Posted: Fri Mar 06, 2009 11:00 pm |
|
|
| Experienced |
|
Joined: Sat Dec 16, 2006 1:59 pm
Posts: 193
|
|
Update:
Looks like the OSecu/XPT forums are down. Not sure if they're coming back up, but that was where I had the largest part of discussion on this map. Regardless, if you have questions or concerns, or want to posts logs from these maps, feel free to post them in this thread. Thanks.
_________________
aka:
-Nate
|
|
| Top |
|
|
|
rodney757
|
Post subject: Re: 06-07 WRX MT: Bullwinkle Stage 2 Maps (A8DH201X/A8DK100X) Posted: Sat Mar 07, 2009 2:15 am |
|
|
| Newbie |
Joined: Wed Feb 18, 2009 5:06 pm
Posts: 35
|
|
| Top |
|
|
Who is online |
Users browsing this forum: No registered users and 0 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
